The iPhone fell into water, got wet, and it rained in 2024. It was said that there was liquid while it was connected to the charger. Basic fix in 4 steps
One mishap that can happen is when your phone gets wet. Although most mobile phones are waterproof, you may encounter problems when connecting the charger cable, for example, on the iPhone itself, a message will appear stating that liquid has been detected. Cutting off the power makes it impossible to charge it at all, especially in such hot weather. Many of you probably find water-related activities soothing. Whether it's going to the pool, going diving, playing in the sea, etc. The important thing is during the last Songkran Festival. Questions about getting cell phones wet There are many more to come. In this article, we'll take a look at how to solve this problem.
The iPhone fell into water and got wet, how can it be fixed?
First of all, we need to understand the water protection capabilities of many mobile phones. The current version is for machines that the manufacturer states are water and dust resistant. Usually, the amount of protection it provides against water and dust damage will be clearly stated on the specifications page. By specifying the IP rating, it is generally used to write the word IP followed by two other symbols. The first symbol indicates the level of protection against damage from solid objects such as dust and contact, and the second symbol is the level of protection against liquid damage (this generally means clean, fresh water.) Examples of writing on the IP68 mobile phone specification page.
But there is another type, which is if the device is not designed to prevent damage at all, such as being dustproof but not waterproof, the letter X will be used to replace the code for that part instead, such as IP5X and others.
The image above details each level of damage protection. The left side is solids (first digit) and the right side is liquids (last digit) for cell phones Smartphone models that are said to be waterproof Most of the time, manufacturers seal the device to comply with IP67 or 68 standards, meaning the device can prevent Damage caused by dust particles common in daily life. Prevents damage resulting from solid objects that come into contact with it. As for waterproofing, it will be at a level that can be taken into water at a certain depth. Within approximately 30 minutes, most manufacturers at this point will specify how much, for example, in the case of the iPhone 15 Pro and Pro Max, they can be used to dive to a maximum depth of 6 meters for 30 consecutive minutes, etc. for that matter. It is recommended to check the manufacturer's water resistance specifications completely first.
However, even though the mobile phone is waterproof from the factory but after using it for a period of time the waterproof seal of the unit may also deteriorate over time. Including the liquid itself if it is not clean water. This may affect the device as well. For example, if immersed in sweet water then the seal around the device starts to deteriorate. If it is not cleaned well there may also be sugar stains on the circuit board inside the device. Just like seawater, salt stains may remain.
Another point where water can interfere with use. Even though it is a waterproof mobile phone, this is the charging port area. Most manufacturers choose not to include a cover for the charging port as before. The main reason is believed to be ease of use in normal situations. This means you won't have to open and close the lid every time you charge the battery. Versus reducing water protection ability because the average person probably won't expose their cell phone to water without protective gear almost every day.
In fact, the waterproof mobile phone charging port circuit is actually designed to have a certain level of security. It makes the machine capable of being exposed to water. Just make sure that the device and charging port are completely dry before charging. For the iPhone case, if the user connects the charging cable and then the system detects the presence of water in the charging port. The system will display a warning message stating that liquid has been detected. Or not ready to charge whether it's a model that uses a Lightning or USB-C port.
If you encounter a warning message like the one above, don't worry. What to do in order based on the information from the pageApple website They are as follows:
1. Quickly disconnect the charging cable.
When I connected the charger to the iPhone and found the message that liquid was detected as above. Quickly disconnect the charging cable immediately. Part of this is to prevent damage that may occur. Another part is connecting the cable. Power will not be supplied to the device anyway.
2. Make the device/charging port completely dry first.
The next step is to make the machine. Especially since the charging port is completely dry. The best method, and the method recommended by Apple, is to try “lightly hitting the iPhone on your palm” with the charging port facing down onto the floor. For the device to drain the water and let the remaining water in different places come out as much as possible and then leave the device in a dry area. Ventilate for half an hour to allow the water to evaporate on its own. It is best to do this in an air-conditioned room where the air is dry. To help the water evaporate more quickly. (But if the weather is in Thailand right now and it is expected that within a few minutes it will be completely dry.) In the meantime do not use the device yet. Do not connect the charging cable at all.
Strictly prohibited methods for drying your mobile phone
2.1 Soak the mobile phone in rice
It's a classic way to moisturize things. It dries quickly and is relatively safe. But for mobile phones with sensitive circuit boards and there may be small nooks and crannies along the device. This method is not recommended at all, and even Apple recently issued an update advising against this method. Because there may be many debris or dust in the rice which may damage the device.
2.2 Use strong winds to expel water.
Avoid using an air blower. Turn on the fan or the strongest thing is use a blower to dry out the water in your phone. This is because high-pressure air may cause water to enter the small openings in the machine. Which may cause more damage to the device than before.
2.3 Use a higher heat level than usual.
In this case, it means exposing the mobile phone to a higher temperature than normal conditions, such as baking it in the microwave. Place it near a heat source. Or place it in the sun in Thailand during April. Because high temperature may cause other equipment in the machine to deteriorate as well. Especially those that have adhesive seals around the device. Including various types of glass, which may be damaged when exposed to high heat. If it's a microwave, it's even trickier. Strictly prohibited
2.4 Use a foreign object to press the charging port.
For example, place a cloth, tissue, or cotton swab in the charging port to absorb water. Because it may damage the contacts in the charging port. In particular, the Lightning connector will be an open slot, unlike USB-C, which will have a long protrusion in the middle to protect it. But if you want to absorb water, it is recommended to use a cloth or tissue to wipe from the outside. No need to poke into the port.
3. Try connecting the charger again.
After leaving the machine alone for about half an hour. Try connecting the charger again. It should now be able to charge normally. But if you still see a warning message that liquid has been detected. You may have to unplug the charger and leave it on again. For confidence, you can leave the device unused for a whole day.
4. Try charging again.
Coming to this step if the device does not show any glitches, it should be usable and chargeable. But if the same issue still exists this time, maybe try changing to a different charging cable. You should also try restarting your iPhone once to let the system clear the settings. Clear some RAM. Because sometimes it can be caused by a software glitch as well.
If in the end you are still unable to charge your iPhone or any mobile phone, you should take the device to the service center to have it checked and solve the problem. This can happen even after the water dries up. Because it may be impure water. As a result, when it dries, there will still be spots of dust, salt and sugar on the circuit board which will cause the device to malfunction. If you're lucky, just take the device out of its box and clean the circuit board. But if you're unlucky, you may need to change the board.
Plus – How to remove water from speakers
Another point of mobile phones that often get stuck in the water is the speaker grille. Generally, you can use a cloth or cotton swab to absorb some of the water. But if you want to expel water into small crevices, you usually rely on sound waves to expel the water. The Apple Watch itself already has this functionality built into watchOS, as for the iPhone, it doesn't exist yet, but we can find it and it can do the job as well.
Before use, be warned that if you are going to use this method with headphones. It should only be used while headphones are removed. Because the sound has a very high frequency. It may cause damage to the auditory nerve.
Sonic app
For iPhone users you can download a free app called Sonic | Tone Generator from here. App Store In the app there is a button that allows users to select an audio frequency level up to 25,000 Hz and press a button to play sound at that frequency through the desired speakers or headphones. To be used to expel water stuck on the grill. As for Android, there are similar applications, such as Sound wave tone generator etc.
Fix my speakers location
If you do not want to install the application on your device there will be sites that can be used as alternatives, such asFix my speakers location When you enter there will be only one white button as shown in the image above. When pressed, high frequency sound will be played immediately to your speakers or headphones. If you want to stop, just press the same button. There are also many apps and websites that can be used to remove water from your phone's speakers. Who uses which one? Please leave a comment below.
Summary of repairs for iPhone Liquid detection has been reported
The first thing is to quickly disconnect the charging cable first. This is followed by wiping and cleaning the outside of the device to dry first. Then leave the device in a dry, well-ventilated area for at least half an hour. Then try plugging the charger again, and if it still doesn't go away, leave it alone for a day and then try again. What you should not do is soak your mobile phone in rice. Including using something to poke into the charging port to absorb water. Because it may cause additional damage.
But if in the end the iPhone still charges or the mobile phone cannot be used anymore you should take the device to the service center to fix the problem. Because it may require emptying the device to clean it at the circuit board level.
“Unapologetic communicator. Wannabe web lover. Friendly travel scholar. Problem solver. Amateur social mediaholic.”