Tp-Link Archer Air R5 and Tp-Link Archer Air E5 are a couple of new worthy Wi-Fi devices from the Tp-Link brand. For the Tp-Link Archer Air R5, it acts as a stub, receiving signals from the router. ONU (The router directly connected to the fiber cable.) to continue the release and the Tp-Link Archer Air E5 will be a signal extender. To be used throughout the house the more adhesion you apply, the more evenly it will be distributed on each floor. Regarding Wi-Fi equipment, we focus on installing it at home. Easy to use I really have to give it to this company.
TP-Link Archer Air R5
Tp-Link Archer Air R5 is a receiver of the signal from the home Internet to be broadcast later, such as True or AIS, and most providers install an ONU router, which is a router that connects directly to the fiber optic cable, so, when you install Tp-Link, it receives Archer Air R5 also signals for broadcast. Then you can create a mesh system inside your home.
Ultra-thin design, beautifully decorates your home.
In terms of design, the Tp-Link Archer Air R5 comes as a simple rectangular panel with dimensions of 210x148x10.8mm, and on the front there is a WPS button and an LED indicator for status notifications. While at the bottom left there is a LAN port, on the right there is a WAN port, and in the middle there is a USB Type-C port to charge the battery.
Install hardware
The first step is to take a picture of the SSID and password on the back. Because it is required to install the software. Next, find a place to install the Tp-Link Archer Air R5 that is suitable for wall mounting. But it must be in the position where the plug was inserted. Which has an adapter included in the box Later, on the back there was a free retaining plate included in the box. More firmly with 3M adhesive As for the LAN cable, connect it to the WAN port and the other side to your ISP's ONU router.
Software settings
Installing the program is easy. When the hardware installation is complete. Please connect to the SSID or Wi-Fi name using the password you took a picture of. You can use your smartphone, PC or laptop to connect. Next, use your web browser to enter 192.168.0.1 to access the device settings page. Then follow the steps. Ready to set a new SSID name and password, that's how you can use the Internet through Tp-Link Archer Air R5, and you can also connect to Wi-Fi or use the LAN port as well.
Wi-Fi 6 and its gigabit ports.
As for the wireless Internet signal, it is the Wi-Fi 6 standard, sending speeds of up to 3 Gbps and distributed in two bands, 2.4 GHz and 5 GHz, but the system will use a single Wi-Fi name distributed over both bands, with a smart system that manages that. And the site we use is suitable for which region? It also has Beamforming technology that helps the signal travel directly to the receiver. For more stable use In addition, if a LAN cable is used, it is also a gigabit port, allowing speeds of up to 1 Gbps.
TP-Link Archer Air E5
To explain simply, the Tp-Link Archer Air E5 is a Wi-Fi signal extender that follows the Tp-Link Archer Air R5, making it easy to create a Mesh Wi-Fi system inside the home. It helps you walk wherever you go and find a full Wi-Fi signal, and can be used under the same Wi-Fi name or SSID throughout the house. He can use the Internet without interruption
The same slim, simple square design.
The Tp-Link Archer Air E5 has a similar design to the R5 which features a square panel design. The size is slightly thinner at 210 x 148 x 8mm, the front has a WPS button and an LED status light, and at the bottom there is a USB Type-C port to connect to the power jack. The back cover has a 3M adhesive pad and screws to attach it to the wall. Available in the box
Hardware installation
Installing Hardware The first step is to take a picture of Default Access and then stick it to the wall. By installing in the desired location. Or different places of the main character and connect USB Type-C to start using it.
Software settings
To install the software, first connect to a Wi-Fi network called TP-Link_Extender. Then use your browser to go to www.tplinkrepeater.net This will take you to the settings page immediately. Then follow the steps and select the SSID of the same name as the one on the Tp-Link Archer Air R5, and you can now receive and broadcast the signal.
EasyMesh WiFi extends the signal throughout the home.
That's all it takes to create a home-wide WiFi network, which users can purchase and install for much more. If the house is very large the advantage is that one SSID or Wi-Fi name can be connected to the entire house. Wherever you go, there is always a connection available. There is no interruption.
Manage everything through the Tether app.
To make it even easier, Tp-Link has an app called Tether to manage each device's settings. It can be downloaded for both iOS and Android.
Price and distribution
The Tp-Link Archer Air R5 and Tp-Link Archer Air E5 are now available for sale in Thailand. There is only one color to choose from: white. You can see more details. And the online sales link is at the address below
The price of TP-Link Archer Air R5 is 3,390 baht
The price of TP-Link Archer Air E5 is 3,190 baht
Related articles
Follow the news Siamphone.com in
“Unapologetic communicator. Wannabe web lover. Friendly travel scholar. Problem solver. Amateur social mediaholic.”